✦ LIBER ✦

Long-term oxidation kinetics of aluminide coatings on alloy steels by low temperature pack cementation process

✍ Scribed by Z. D. Xiang; S. R. Rose; P. K. Datta

Book ID: 106392028
Publisher: Springer
Year: 2006
Tongue: English
Weight: 240 KB
Volume: 41
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-006-0806-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Formation of Aluminide Coatings on Ferri

Formation of Aluminide Coatings on Ferritic–Martensitic Steels by a Low-Temperature Pack Cementation Process

✍ Y.Q. Wang; Y. Zhang; D.A. Wilson 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 803 KB

Formation and oxidation performance of l

Formation and oxidation performance of low-temperature pack aluminide coatings on ferritic–martensitic steels

✍ B.L. Bates; Y.Q. Wang; Y. Zhang; B.A. Pint 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 891 KB

A pack cementation process was developed to coat commercial 9% Cr ferritic-martensitic steel T91 at temperatures below its normal tempering temperature to avoid any potential detrimental effect on the mechanical properties of the coated alloy. In order to prevent the formation of Fe 2 Al 5 coatings,

Steam oxidation resistance and thermal s

Steam oxidation resistance and thermal stability of chromium aluminide/chromium hybrid coating on alloy steels formed at low temperatures

✍ Z.D. Xiang; S.R. Rose; P.K. Datta; M. Scheeffer 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 737 KB

This study investigated the feasibility of forming a hybrid coating with a structure consisting of a top Craluminide layer and an inner Cr layer on alloy steels by using a two step process: electro-Cr plating and then pack aluminising at low temperatures. The oxidation resistance of the coating so f

Structure and oxidation behavior of Si–Y

Structure and oxidation behavior of Si–Y co-deposition coatings on an Nb silicide based ultrahigh temperature alloy prepared by pack cementation technique

✍ Xiaodong Tian; Xiping Guo 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 762 KB

In order to improve the oxidation resistance of silicide coatings on Nb silicide based alloys, Y-modified silicide coatings were prepared by co-depositing Si and Y at 1050, 1150 and 1250 °C for 5-20 h, respectively. It has been found that the coatings prepared by co-depositing Si and Y at 1050 and 1