✦ LIBER ✦

Long-Term Degradation of a Poly-Lactide Co-Glycolide/β-Tricalcium Phosphate Biocomposite Interference Screw

✍ Scribed by F. Alan Barber; W.D. Dockery; Scott A. Hrnack

Book ID: 116257460
Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 669 KB
Volume: 27
Category: Article
ISSN: 0749-8063
DOI: 10.1016/j.arthro.2010.11.056

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The Degradation Outcome of Biocomposite

The Degradation Outcome of Biocomposite Suture Anchors Made From Poly L-Lactide-Co-Glycolide and β-Tricalcium Phosphate

✍ Barber, F. Alan; Dockery, W.D.; Cowden, Courtney H. 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 775 KB

Long-Term Degradation of Poly-Lactic Co-

Long-Term Degradation of Poly-Lactic Co-Glycolide/β-Tricalcium Phosphate Biocomposite Anchors in Arthroscopic Bankart Repair: A Prospective Study

✍ Randelli, Pietro; Compagnoni, Riccardo; Aliprandi, Alberto; Cannaò, Paola Maria; 📂 Article 📅 2014 🏛 Elsevier Science 🌐 English ⚖ 594 KB

Long-term degradation of poly-lactide co

Long-term degradation of poly-lactide co-glycolide/B-tricalcium phosphate biocomposite anchors in arthroscopic repair of Bankart's lesions. A prospective study

✍ Compagnoni, R.; Arrigoni, P.; Spennacchio, P.; Fossati, C.; Randelli, P. 📂 Article 📅 2013 🏛 Masson Editeur 🌐 French ⚖ 66 KB

Long-term Absorption of β–Tricalcium Pho

Long-term Absorption of β–Tricalcium Phosphate Poly-L-Lactic Acid Interference Screws

✍ F. Alan Barber; William D. Dockery 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 483 KB

Development of a 95/5 poly(L-lactide-co-

Development of a 95/5 poly(L-lactide-co-glycolide)/hydroxylapatite and β-tricalcium phosphate scaffold as bone replacement material via selective laser sintering

✍ Rebecca Louise Simpson; Florencia Edith Wiria; Andrew A. Amis; Chee Kai Chua; Ka 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 495 KB

## Abstract 95/5 Poly(L‐lactide‐__co__‐glycolide) was investigated for the role of a porous scaffold, using the selective laser sintering (SLS) fabrication process, with powder sizes of 50–125 and 125–250 μm. SLS parameters of laser power, laser scan speed, and part bed temperature were altered and