We report experimental results on an all-fiberized linearly polarized single-mode pulse Yb-doped fiber laser/amplifier working at 1064 nm. Using a fiberized acousto-optic Qswitched ytterbium fiber laser as the seed source, a double-clad polarization-maintaining fiber as the gain medium, a (6+1)×1 mu
Linearly polarized all-fiber laser using a short section of highly polarizing microstructured fiber
✍ Scribed by M. Delgado-Pinar; A. Díez; J.L. Cruz; M.V. Andrés
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 95 KB
- Volume
- 5
- Category
- Article
- ISSN
- 1612-2011
No coin nor oath required. For personal study only.
✦ Synopsis
A linearly polarized all-fiber erbium laser is presented in this work. The polarization selective element consists on a piece of a single-mode, polarizing microstructured fiber, which is placed within the laser cavity. The microstructured fiber shows a regular lattice of air-holes, in which four holes next to the core were enlarged. This fiber shows a polarization dependent loss of 16 dB/m around 1550 nm. The laser cavity presents different losses for each polarization and, as a consequence, a highly polarized emission is obtained. The polarization ratio of the emitted power was in excess of 20 dB.
📜 SIMILAR VOLUMES