๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Line-spring model for surface cracks in a reissner plate

โœ Scribed by F. Delale; F. Erdogan

Publisher
Elsevier Science
Year
1981
Tongue
English
Weight
648 KB
Volume
19
Category
Article
ISSN
0020-7225

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Three-dimensional elastic-plastic j-inte
Three-dimensional elastic-plastic j-integral calculations for semielliptical surface cracks in a tensile plate
โœ G.P. Nikishkov; S.N. Atluri ๐Ÿ“‚ Article ๐Ÿ“… 1988 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 495 KB

Using a finite element method, in conjunction with an equivalent domain integral approach, the elastic-plastic crack-tip J-integral is computed for semielliptical surface flaws in a plate under a remote tensile load. The computed elastic-plastic values of the J-integral are compared to the elastic o

Weight function for the surface point of
Weight function for the surface point of semi-elliptical surface crack in a finite thickness plate
โœ G. Shen; A. Plumtree; G. Glinka ๐Ÿ“‚ Article ๐Ÿ“… 1991 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 741 KB

The weight function for the surface point of a semi-elliptical crack in a plate of finite thickness has been derived and tested against numerical data available in the literature. Derivation was accomplished by using the universal weight function form and two reference stress intensity factors. It w

A simple model for the contact problem o
A simple model for the contact problem of a finite cracked plate in bending
โœ C.W. Woo; Y.K. Cheung; Y.Z. Chen; Y.H. Wang ๐Ÿ“‚ Article ๐Ÿ“… 1988 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 331 KB

In bending of a finite cracked plate, the stress intensity factor (SfF) at a cracked tip is usually negative. This means that the displacement at the vicinity of the crack tip is overlapped. However, this is not reasonable. In this paper a simple model is suggested. When the SIF is negative, some pa