✦ LIBER ✦

Line broadening in cold-worked zirconium

✍ Scribed by J.H. Mogard; B.L. Averbach

Publisher: Elsevier Science
Year: 1958
Weight: 261 KB
Volume: 6
Category: Article
ISSN: 0001-6160
DOI: 10.1016/0001-6160(58)90172-x

No coin nor oath required. For personal study only.

✦ Synopsis

The cold-work distortion of zirconium was studied by means of an X-ray method which involves an interpretation of the shapes of the broadened peak profiles. This approach (l) had been applied extensively to materials of cubic symmetry(2), and to a study of imperfections in cobalt.(3) Broadening effects arising primarily from particle size and strains are expected for zirconium, with stacking faults less likely to occur. The metal is ductile at room temperature and deforms by slip and twinning processes.c4) Crystal bar zirconium containing 235 p.p.m. 0, 220 p.p.m. Fe, and 110 p.p.m. C, as the principal impurities was used. The hydrogen content of about 40 p.p.m. was lowered to about 3 p.p.m. by annealing The authors are indebted to Messrs. C. Houska and S. Allen for several valuable discussions,

📜 SIMILAR VOLUMES

X-ray line broadening from cold-worked i

X-ray line broadening from cold-worked iron

✍ R.I. Garrod; J.H. Auld 📂 Article 📅 1955 🏛 Elsevier Science ⚖ 1001 KB

Measurements of the x-ray line broadening from cold-worked iron filings, and from wire specimens prestressed by uniazial tension to various stages in the plastic range, have been analyzed in terms of both line breadths and line shapes for a number of high angle reflections. The results indicate that

X-ray line broadening studies of cold-wo

X-ray line broadening studies of cold-worked uranium

✍ R Krishnan; V.S Arunachalam; M.K Asundi 📂 Article 📅 1962 🏛 Elsevier Science ⚖ 372 KB

The X-ray line broadening studies on cold-worked uranium for various amounts of deformation have been carried out. The necessity of obtaining the second-order reflections for separating the particle size effect from the lattice distortion has been eliminated by disregarding the dimensional distribut

Low-temperature internal friction in col

Low-temperature internal friction in cold-worked zirconium

✍ J.C. Bolcich; E.J. Savino 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 214 KB

Interstitial atoms in cold worked alumin

Interstitial atoms in cold worked aluminum

✍ M.E. Straumanis; T. Ejima 📂 Article 📅 1960 🏛 Elsevier Science ⚖ 324 KB

Faults in cold worked βAlNi

✍ G.P. Mohanty; J.J. Wert 📂 Article 📅 1963 🏛 Elsevier Science ⚖ 248 KB

Anelastic effects in cold-worked nickel

✍ J.L Besson; P Boch 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 969 KB