✦ LIBER ✦

Limits of Increasing the Penetration of Shaped‐Charge Jets by Pulsed Thermal Action on Shaped‐Charge Liners

✍ Scribed by A.V. Babkin; P.A. Bondarenko; S.V. Fedorov; S.V. Ladov; V.I. Kolpakov; S.G. Andreev

Book ID: 110317743
Publisher: SP MAIK Nauka/Interperiodica
Year: 2001
Tongue: English
Weight: 255 KB
Volume: 37
Category: Article
ISSN: 0010-5082
DOI: 10.1023/a:1012948702419

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The Penetration Resistance of a Titanium

The Penetration Resistance of a Titanium Alloy against Jets From Tantalum Shaped Charge Liners

✍ W. Walters; W. Gooch; M. Burkins 📂 Article 📅 2000 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 198 KB

The penetration resistance of a titanium

The penetration resistance of a titanium alloy against jets from tantalum shaped charge liners

✍ William Walters; William Gooch; Matthew Burkins 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 510 KB

Stability of shaped-charge jets generate

Stability of shaped-charge jets generated under pulsed action on conical targets

✍ A. A. Charakhch'an 📂 Article 📅 1997 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 273 KB

On the problem of controlling the effici

On the problem of controlling the efficiency of action of shaped-charge jets

✍ S. V. Demidkov 📂 Article 📅 1998 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 417 KB

Structure of coatings containing molybde

Structure of coatings containing molybdenum carbides obtained by the action of shaped charge jets

✍ S. A. Gromilov, A. V. Alekseev, S. A. Kinelovskii 📂 Article 📅 2012 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 368 KB

Analysis of jet formation and penetratio

Analysis of jet formation and penetration by conical shaped charge with the inhibitor

✍ Masahide Katayama; Atsushi Takeba; Susumu Toda; Seishiro Kibe 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 905 KB

This paper proposes a numerical method to simulate not only the jet formation process of the conical shaped charge with the inhibitor: approximately 11 km/s aluminum jet, but also the succeeding flight and impact processes onto the target plates. The method is demonstrated by performing a series of