A silicon thin-film technology could lead to less expensive modules by the use of less silicon material and by the implementation of monolithic module processes. A technology based on polycrystalline-silicon thin-films with a grain size between 1 m and 1 mm (pc-Si), seems particularly promising sinc
Light-induced instability of amorphous silicon photovoltaic cells
โ Scribed by S. Tsuda; N. Nakamura; K. Watanabe; T. Takahama; H. Nishiwaki; M. Ohnishi; Y. Kuwano
- Publisher
- Elsevier Science
- Year
- 1983
- Weight
- 638 KB
- Volume
- 9
- Category
- Article
- ISSN
- 0379-6787
No coin nor oath required. For personal study only.
โฆ Synopsis
Changes in the characteristics of amorphous silicon (a-Si) solar cells caused by light exposure were studied. The degradation ratio of the conversion efficiency of p-i-n a-Si solar cells caused by light exposure depends on the thickness of the i layer. A decrease in the fill factor was commonly observed, and in such cases the diode quality factor and shunt current density increased, which suggested a change in junction properties. It was shown that additional doping of the i layer with a small amount of boron prevents the decrease in conversion efficiency with light exposure. In a 1 year experiment on a 2 kW a-Si power generating system, a 10% decrease in conversion efficiency was observed (without additional boron doping).
๐ SIMILAR VOLUMES
Hydrogenated amorphous silicon films (a-Si:H) have been deposited by r.f. glow discharge of silane (Sill 4) and hydrogen (H 2) gas mixture. The hydrogen concentration in the gas mixture and the applied r.f. power density have been varied. The initial photoconductivity (crp), photosensitivity (%/~d),