## Abstract As new environmental technologies have been introduced, and as older technologies have been applied in new ways to meet specific combinations of environmental and process needs, new failure modes have evolved, some of which can contribute to increased risks of explosion, fire, and chemi
Lessons learned from fires, flash fires, and explosions involving hot work
β Scribed by Russell A. Ogle; Andrew R. Carpenter
- Publisher
- American Institute of Chemical Engineers
- Year
- 2001
- Tongue
- English
- Weight
- 755 KB
- Volume
- 20
- Category
- Article
- ISSN
- 1066-8527
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Eight case studies of fires, flash fires and explosions involving hot work are reviewed. Each of these accidents occurred in the course of performing hot work on, or in the vicinity of, a vessel, container, or pipe. In most cases, the fuel's presence was not identified prior to the accident. Another feature of these case studies is that the accident occurred despite the fact that the hot work operators were familiar with the tools, procedures, and the equipment on which they were working.
The causal factors of these accidents are identified and compared with the applicable safety standards to show how safe work practices could have prevented the accidents. The fundamental conclusion to be drawn from these eight case studies is this: if you fail to recognize a hazard, you cannot control it.
π SIMILAR VOLUMES
## Abstract On November 2, 1997, a fixed roof gasβoil tank located in the tank farm of Ashdod Oil Refinery exploded, causing the death of one Sample Man, and a fire in two adjacent tanks located in the same dike. The fire lasted less than 3 hours, but there was significant public concern about the