✦ LIBER ✦

Leaching behaviour of chlorinated aromatic compounds from fly ash of waste incinerators

✍ Scribed by J. Fischer; W. Lorenz; M. Bahadir

Book ID: 116079165
Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 438 KB
Volume: 25
Category: Article
ISSN: 0045-6535
DOI: 10.1016/0045-6535(92)90286-z

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Extraction behaviour of polycyclic aroma

Extraction behaviour of polycyclic aromatic hydrocarbons adsorbed on waste incineration fly ash

✍ R. Fischer; R. Kreuzig; M. Bahadir 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 370 KB

Metal Leaching of Fly Ash from Municipal

Metal Leaching of Fly Ash from Municipal Waste Incineration by Aspergillus niger

✍ Bosshard, Philipp P.; Bachofen, Reinhard; Brandl, Helmut 📂 Article 📅 1996 🏛 American Chemical Society 🌐 English ⚖ 290 KB

Leaching characteristics of heavy metals

Leaching characteristics of heavy metals during cement stabilization of fly ash from municipal solid waste incinerators

✍ Liang, Shunwen ;Jiang, Jianguo ;Zhang, Yan ;Xu, Xin 📂 Article 📅 2008 🏛 Higher Education Press and Springer 🌐 English ⚖ 174 KB

99/02541 Detoxification and recycling of

99/02541 Detoxification and recycling of fly ash from waste incinerators

📂 Article 📅 1999 🏛 Elsevier Science ⚖ 203 KB

Characterization, decontamination and he

Characterization, decontamination and health effects of fly ash from waste incinerators

✍ Lee, P. H. ;Delay, I. ;Nasserzadeh, V. ;Swithenbank, J. ;McLeod, C. ;Argent, B. 📂 Article 📅 1998 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 799 KB

Analysis of polycyclic aromatic compound

Analysis of polycyclic aromatic compounds in the fly ash of an incineration plant for radioactive waste

✍ Tausch, H. ;Stehlik, G. 📂 Article 📅 1985 🏛 John Wiley and Sons 🌐 English ⚖ 349 KB

in styrene-butadiene rubber-latex. Chromatographic conditions: 60 m X 0.32 mm i.d., Durabond-1; film thickness = 1.2 pm; carrier gas = N B ; sample at 7OoC, equilibration time = 30 min, pressurization time = 1 min, injection time 6 s., injection temp. = 250°C; FID, detector temp. = 300OC; column tem