✦ LIBER ✦

Lateral sealing gasket and method

Publisher: Elsevier Science
Year: 2009
Tongue: English
Weight: 248 KB
Volume: 2009
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(09)70333-2

No coin nor oath required. For personal study only.

✦ Synopsis

Baker Hughes Inc. USA This patent describes the construction of a downhole pump that includes an electric motor containing a dielectric lubricant. A seal section is mounted to the motor for reducing the pressure differential between the lubricant in the motor and the well bore fluid. A mechanical shaft seal is included between the motor and pump.

📜 SIMILAR VOLUMES

Sealing structure and gasket

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 140 KB

## Manufacture Generale de Joints, France A heat-sealable seal for the mouth of a vessel is described. It includes a substrate made of an expanded polyester layer, connected by adhesive to a lid that includes an aluminium foil and a heat-sealable film. The aluminium foil and the film are connected

Method of manufacturing gasket and seal

Method of manufacturing gasket and seal structure

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 107 KB

Applicant: A.W. Chesterton Co, USA A mechanical seal is described that uses an elastomer bellows as the spring. This is to assist with providing an even face loading and improved resistance to clogging compared with typical coil spring designs.

Valve gasket sealing surface refurbishin

Valve gasket sealing surface refurbishing methods and systems

📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 177 KB

This patent describes a tandem radial shaft seal that is specifically designed for automotive cooling systems. A partial vacuum may be applied to the system for leak testing and then filling. This can cause a conventional lip seal to vent air inwards. This seal has a support ring on the atmospheric

Gasket and method of forming a seal ther

Gasket and method of forming a seal therewith

📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 97 KB

Sealing structure with groove and gasket

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 152 KB

Silicone foam molding method for sealing

Silicone foam molding method for sealing timing belt cover gasket

✍ Yuko Kobayashi; Tatsuya Kagosaki; Seiji Omura; Hisao Yamaguchi 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 159 KB

Abstracts 315 9534775 Numerical Study of Separated Flow around After-Body of Road Vehicle Kiyohira Aoki Toshikazu Ohbayashi (Isuzu Motors Ltd.) Separated flow about after-body of automobile is numerically studied 3-dimensional, time-dependent full Navier-Stokes simulation using SGS (Sub-Grid-Scale)