## Abstract Short‐period fiber Bragg gratings with gratings planes tilted at an angle 8° corresponding to the fiber axis show core mode and a large number of cladding‐mode resonances in transmission. The differences between the cladding‐mode resonance and the core‐mode resonance are used to detect
Lateral force sensor based on a core-offset tilted fiber Bragg grating
✍ Scribed by Li-Yang Shao; Jacques Albert
- Publisher
- Elsevier Science
- Year
- 2011
- Tongue
- English
- Weight
- 610 KB
- Volume
- 284
- Category
- Article
- ISSN
- 0030-4018
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A simple refractive‐index fiber sensor based on a tilted Bragg fiber grating (TFBG) interacting with multimode fiber (MMF) is described. The sensor structure is formed by insertion of a small section of MMF between the single‐mode fiber and the TFBG. The average reflective power in the
## Abstract This article mainly depicts the sensitivity of the pressure sensor based on fiber Bragg grating coated with polymers of different ratio hardener and silicone sealant. The result shows that when the ratio is 1:13, the effect of the sensitivity of 1.94 × 10^−2^/MPa can be obtained. © 2008
## Abstract A chemical sensor based on a Bragg grating in the multimode fiber has been demonstrated experimentally. Experimental results indicate that the reflection peak of high‐order mode P2 exhibits a much higher concentration sensitivity of the chemical solution than the reflection peak P1 of t
## Abstract A simple fiber‐Bragg‐grating (FBG) sensor system based on a linear‐cavity fiber laser is proposed and experimentally demonstrated. The lasing wavelength shift resulting from the temperature variation on this sensing element is discriminated by two FBGs. These two FBGs, acting as wavelen