✦ LIBER ✦

Laser heating process and experimental validation

✍ Scribed by B.S. Yilbas

Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 832 KB
Volume: 40
Category: Article
ISSN: 0017-9310
DOI: 10.1016/0017-9310(96)00124-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Laser heating mechanism including evapor

Laser heating mechanism including evaporation process

✍ Bekir Sami Yilbaş; Ahmet Z. Şahin 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 315 KB

Laser heating mechanism including evapor

Laser heating mechanism including evaporation process initiating laser drilling

✍ Bekir Sami Yilbaş; Ahmet Z. Şahin; R. Davies 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 638 KB

Entropy generation during laser short-pu

Entropy generation during laser short-pulse heating process

✍ A. Ozsunar 📂 Article 📅 2006 🏛 Springer-Verlag 🌐 English ⚖ 395 KB

Large-scale sonochemical reactors for pr

Large-scale sonochemical reactors for process intensification: design and experimental validation

✍ Parag R Gogate; Sukti Mujumdar; Aniruddha B Pandit 📂 Article 📅 2003 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 133 KB

## Abstract Acoustic cavitation results in substantial enhancement in the rates of various chemical reactions but the existing knowledge about the application of reactors based on acoustic cavitation is limited to very small capacities (of the order of few millilitres). In the present work, an over

A Kinetic Theory approach for laser puls

A Kinetic Theory approach for laser pulse heating process

✍ Muhammad Sami; B.S. Yilbas 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 939 KB

Numerical and Experimental Investigation

Numerical and Experimental Investigation of Convex Laser Forming Process

✍ Wenchuan Li; Y. Lawrence Yao 📂 Article 📅 2001 🏛 Society of Manufacturing Engineers 🌐 English ⚖ 183 KB

Laser forming is a flexible sheet metal forming technique using laser-induced thermal deformation to shape sheet metal without hard tooling or external forces. Concave laser forming can be readily achieved, while convex forming may occur through buckling, but the buckling direction heavily depends o