✦ LIBER ✦

Laser generation of lamb waves for defect detection: Experimental methods and finite element modeling

✍ Scribed by Burrows, S.E.; Dutton, B.; Dixon, S.

Book ID: 119824065
Publisher: IEEE
Year: 2012
Tongue: English
Weight: 920 KB
Volume: 59
Category: Article
ISSN: 0885-3010
DOI: 10.1109/tuffc.2012.2158

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Numerical simulation of laser-generated

Numerical simulation of laser-generated Lamb wave by finite element method in thin transversely isotropic laminate composite

✍ Jijun Wang; Zhonghua Shen; Baiqiang Xu; Xiaowu Ni; Jianfei Guan; Jian Lu 📂 Article 📅 2005 🏛 Optics InfoBase 🌐 English ⚖ 433 KB

A noncontact NDE method using a laser ge

A noncontact NDE method using a laser generated focused-Lamb wave with enhanced defect-detection ability and spatial resolution

✍ Hongjoon Kim; Kyungyoung Jhang; Minjea Shin; Jaeyeol Kim 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 457 KB

A Model for the Electromagnetic Generati

A Model for the Electromagnetic Generation and Detection of Rayleigh and Lamb Waves

✍ Thompson, R.B. 📂 Article 📅 1973 🏛 Institute of Electrical and Electronics Engineers ⚖ 723 KB

Numerical modeling of generalized millim

Numerical modeling of generalized millimeter-wave transmission media with finite element and transmission line matrix methods

✍ Eswarappa, ;Costache, G. ;Hoefer, W. J. R. 📂 Article 📅 1989 🏛 Springer 🌐 English ⚖ 417 KB

Theory and method for updating least-squ

Theory and method for updating least-squares finite element model of symmetric generalized centro-symmetric matrices

✍ Dongxiu Xie; Zhongzhi Zhang; Zhongyun Liu 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 201 KB

Let X, F be a displacement matrix and load matrix, respectively. C (obtained by calculations or measurements) is an estimate matrix of the analytical model. A method is presented for correction of the model C, based on the theory of inverse problem of matrices. The corrected model is symmetric gener

Micromechanical finite-element modeling

Micromechanical finite-element modeling and experimental characterization of the compressive mechanical properties of polycaprolactone–hydroxyapatite composite scaffolds prepared by selective laser sintering for bone tissue engineering

✍ Shaun Eshraghi; Suman Das 📂 Article 📅 2012 🏛 Elsevier Science 🌐 English ⚖ 926 KB