๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Laser bending of thin stainless steel sheets

โœ Scribed by Chan, K. C.; Yau, C. L.; Lee, W. B.

Book ID
120836459
Publisher
Laser Institute of America
Year
2000
Tongue
English
Weight
122 KB
Volume
12
Category
Article
ISSN
1042-346X

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Bending of stainless steel thin sheets b
Bending of stainless steel thin sheets by a raster scanned low power CO2 laser
โœ Carlos Vรกsquez-Ojeda; Jorge Ramos-Grez ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 939 KB

Laser forming of thin metal sheet plates using a low output power CO 2 laser has been successfully performed using a mirror based scanning system. Graphite coated AISI 302 stainless steel plates, 0.3 mm thick, have been bent using a 60 W CO 2 laser with a stepped scanning pattern, varying relevant p

Studies on laser bending of stainless st
Studies on laser bending of stainless steel
โœ J.Dutta Majumdar; A.K. Nath; I. Manna ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 846 KB

In the present study, laser bending of AISI 304 stainless steel sheet has been attempted with a high power (2 kW) continuous wave CO 2 laser. Bending angle was measured as a function of laser/processing parameters including power density, scan speed, number of passes and sheet thickness. Following l

Air bending and springback of stainless
Air bending and springback of stainless steel clad aluminum sheet
โœ K. Yilamu; R. Hino; H. Hamasaki; F. Yoshida ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 872 KB

This paper deals with bending and springback phenomena of a stainless-steel clad aluminum sheet in V-shaped air bending. The aim of this study is to investigate the bending characteristics such as sheet thickness change and the bending angles of the sheet before/after springback. The first part of t