𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Laser beam welding and friction stir welding of 6013-T6 aluminium alloy sheet

✍ Scribed by R. Braun; C. Dalle Donne; G. Staniek

Publisher
John Wiley and Sons
Year
2000
Tongue
English
Weight
896 KB
Volume
31
Category
Article
ISSN
0933-5137

No coin nor oath required. For personal study only.

✦ Synopsis

Laser beam welding and friction stir welding of 6013-T6 aluminium alloy sheet Laserstrahlschweiûen und Reibru È hrschweiûen der Al-Legierung 6013-T6

📜 SIMILAR VOLUMES

Grain refinement process in commercial 7
Grain refinement process in commercial 7075-T6 aluminum alloy under friction stir welding and superplasticity
✍ Y. Motohashi; T. Sakuma; A. Goloborodko; T. Ito; G. Itoh 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 296 KB

## Abstract **About the influence of substrate roughness and spray particle size on the adhesion of thermal spray coatings** Process of grain refinement taking place during friction stir welding of a 7075‐T6 Al alloy was studied. It appears that the fine‐grained structure is formed by the grain fr

Structure-property investigations on a l
Structure-property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications Part I: Local gradients in microstructure, hardness and strength
✍ W.V. Vaidya; M. Horstmann; V. Ventzke; B. Petrovski; M. Koçak; R. Kocik; G. Temp 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 484 KB

## Abstract Sheets of AA6056 and Ti6Al4V were butt‐joined by inserting the Ti‐sheet into the profiled Al‐sheet and by melting the Al‐alloy alone using a split beam Nd:YAG laser. To study microstructural effects on properties, the Al‐alloy was used in two tempers; T4 followed by post weld heat treat

Structure-property investigations on a l
Structure-property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications. Part II: Resistance to fatigue crack propagation and fracture
✍ W. V. Vaidya; M. Horstmann; V. Ventzke; B. Petrovski; M. Koçak; R. Kocik; G. Tem 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 553 KB

## Abstract Investigations were continued on the dissimilar laser beam welds of AA6056 and Ti6Al4V, fabricated by inserting Ti‐sheet into the profiled Al‐sheet and melting AA6056 alone. By using microstructure, hardness and strength as the criteria, sites exhibiting non‐uniform microstructure and l