✦ LIBER ✦

Laminates of multi-layered Fe films for microwave applications

✍ Scribed by Igor T. Iakubov; Andrey N. Lagarkov; Sergey A. Maklakov; Alexey V. Osipov; Dmitry A. Petrov; Konstantin N. Rozanov; Ilya A. Ryzhikov

Book ID: 113724803
Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 278 KB
Volume: 316
Category: Article
ISSN: 0304-8853
DOI: 10.1016/j.jmmm.2007.03.108

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation and microwave characterizati

Preparation and microwave characterization of BaWO4filled polytetrafluoroethylene laminates for microwave substrate applications

✍ Nijesh K. James; S. Rajesh; K. P. Murali; K. Stanly Jacob; R. Ratheesh 📂 Article 📅 2010 🏛 Springer US 🌐 English ⚖ 352 KB

Hysteresis loop of Fe and Ni successivel

Hysteresis loop of Fe and Ni successively evaporated multi-layer films

✍ M. Goto; T. Sai; H. Tange; T. Kamimori 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 231 KB

Polymer-based multi-layer conductive ele

Polymer-based multi-layer conductive electrode film for plastic LCD applications

✍ J.-Y. Kim; D. Sohn; E.-R. Kim 📂 Article 📅 2001 🏛 Springer 🌐 English ⚖ 213 KB

Preparation and characterization of cord

Preparation and characterization of cordierite filled PTFE laminates for microwave substrate applications

✍ K. P. Murali; S. Rajesh; K. Stanly Jacob; Om Prakash; A. R. Kulkarni; R. Rathees 📂 Article 📅 2009 🏛 Springer US 🌐 English ⚖ 394 KB

Rf-sputtering deposition and magnetic ch

Rf-sputtering deposition and magnetic characterisation of Nd–Fe–B thin films for microwave applications

✍ M. Valetas; M. Vérité; A. Bessaudou; F. Cosset; J.C. Vareille 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 204 KB

Design of multi-layered polygonal helix

Design of multi-layered polygonal helix antennas for RFID applications

✍ Jaeyul Choo; Hosung Choo; Ikmo Park; Yisok Oh 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 227 KB

## Abstract In this letter, we propose a novel printed helix antenna for an RFID reader in the UHF band. The printed microstrip line of the antenna is first wound outside a polygonal‐shaped layer and then wound on an inner layer to control the overall gain and the radiation pattern of the antenna.