## Abstract A kinetic study of ethylene/1βhexene copolymerization is conducted with a supported metallocene catalyst in a gasβphase reactor. The investigation into the kinetics of ethylene/1βhexene copolymerization includes the effects of operational parameters such as the reaction temperature, pre
Kinetic study of olefin polymerization with a supported metallocene catalyst. I. Ethylene/propylene copolymerization in gas phase
β Scribed by Z. Gene Xu; S. Chakravarti; W. Harmon Ray
- Publisher
- John Wiley and Sons
- Year
- 2001
- Tongue
- English
- Weight
- 950 KB
- Volume
- 80
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract A kinetic study of ethylene homopolymerization is conducted with a supported unbridged metallocene catalyst in a slurry reactor. The effects of operational parameters such as the reaction temperature and pressure on kinetics are investigated. The kinetic parameters which have been deter
## Abstract A kinetic study of ethylene/1βhexene (E/1βH) copolymerization is conducted with a supported bridged metallocene catalyst in a gas phase reactor. The investigation into the kinetics of ethylene/1βhexene copolymerization includes the effects of operational parameters such as the reaction
## Abstract **Summary:** Ethylene homopolymerizations were executed with a supported Ind~2~ZrCl~2~/MAO catalyst using the soβcalled Reactive Bed Preparation method. This RBP method combined a slurry polymerization with a gas phase polymerization with the same polymerizing particles, i.e., a reactiv
This study focuses on the kinetics of ethylene/propylene (homo/co)polymerization reactions using a high activity TiCl 4 /MgCl 2 /AlEt 3 catalyst. The reactor system is a gas phase reactor equipped with an on-line composition control scheme. As such, important kinetic data such as the instantaneous r
## Abstract Ethylene was polymerized at 5 bar in a stirred powder bed reactor with silica supported __rac__βMe~2~Si[Ind]~2~ZrCl~2~/methylaluminoxane (MAO) at temperatures between 40Β°C and 80Β°C using NaCl as support bed and triethylaluminium (TEA) as a scavenger for impurities. For this fixed recipe