Abstract
Full Paper: The objective of this work is aimed at determining the kinetics of HALS photografting in PP films as a function of the additive concentration under both natural weathering and accelerated UV conditions. The stabilizer studied had a single structure that combined HALS and a UV absorbing unit detectable at 308 nm in the UV spectrum of PP, capable of inducing a photoreaction with the polymer matrix. The kinetics of HALS photografting on PP films at various additive concentrations was determined by direct spectroscopic measurements on film samples through the absorption band of the stabilizer positioned at 308 nm in the UV spectra, which was attributed to the highly conjugated methylenic double bond. The content of free HALS was determined as a function of exposure time by UV spectroscopy for all the additive concentration ratios used. It is shown that the kinetics of HALS photografting increase with a decrease in the additive concentration ratio. The whole grafting process under conditions of natural weathering occurred in the PP film after almost 350 h of exposure, while approximately 20 h were necessary under accelerated UV conditions. Moreover, these kinetics are well described by a third order polynomial model, validated by a maximum value of the coefficient of correlation close to unity. This was also confirmed by a comparison of the time values measured at 50% of the total grafting calculated from the model with those observed experimentally. This finding was consistent with the data obtained on the free HALS content determined by UV spectroscopy.
The percentage of HALS photografting in PP films as a function of time under natural weathering, determined by UV spectroscopy.
magnified imageThe percentage of HALS photografting in PP films as a function of time under natural weathering, determined by UV spectroscopy.