✦ LIBER ✦

Kinetic modeling of high pressure autothermal reforming

✍ Scribed by Mark A. Reese; Scott Q. Turn; Hong Cui

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 923 KB
Volume: 195
Category: Article
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2009.07.031

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

99/03093 High pressure autothermal refor

99/03093 High pressure autothermal reforming (HP ATR)

📂 Article 📅 1999 🏛 Elsevier Science ⚖ 199 KB

03 Gaseous fuels (economics, business, marketing, policy) concentration was found to be 159 mg/kg (dry weight). Finally, the PAH contamination was verified to be aged, according to PAH/alkyl ratios and high molecular weight PAHs/low molecular weight PAHs ratios. 99lQ36al Performance analysis of ZnO-

Modeling of IT-SOFC with indirect intern

Modeling of IT-SOFC with indirect internal reforming operation fueled by methane: Effect of oxygen adding as autothermal reforming

✍ P. Dokmaingam; J.T.S. Irvine; S. Assabumrungrat; S. Charojrochkul; N. Laosiripoj 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 1012 KB

Mathematical models of an Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC) with indirect internal reforming operation (IIR-SOFC) fueled by methane were developed. The models were based on a steady-state heterogeneous two-dimensional tubular-design SOFC. The benefit in adding oxygen to methan

Kinetic models of catalytic reforming

✍ A. Wolff; J. Kramarz 📂 Article 📅 1979 🏛 Springer US 🌐 English ⚖ 587 KB

Two-section reactor model for autotherma

Two-section reactor model for autothermal reforming of methane to synthesis gas

✍ P. Maarten Biesheuvel; Gert Jan Kramer 📂 Article 📅 2003 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 254 KB 👁 1 views

## Abstract A 1‐D stationary reactor model describes the catalytic conversion of a gaseous hydrocarbon fuel with air and steam to synthesis gas by autothermal reforming and catalytic partial oxidation. The model defines two subsequent sections in the reactor: an upstream oxidation section and a dow

Modeling of high-pressure ethylene polym

Modeling of high-pressure ethylene polymerization. I. Kinetic parameters of oxygen initiation

✍ B. Cerinski; J. Jelencic 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 119 KB 👁 2 views

## Abstract A kinetic model of a high‐pressure, free‐radical ethylene polymerization is presented. The model of S. Goto, K. Yamamoto, S. Furui, and M. Sugimoto (J Appl Polym Sci, Appl Polym Symp 1981, 36, 21), developed for several common peroxides, was extended to be applicable for the oxygen init

Autothermal reforming of methane for pro

Autothermal reforming of methane for producing high-purity hydrogen in a Pd/Ag membrane reactor

✍ Hsin-Fu Chang; Wen-Ju Pai; Ying-Ju Chen; Wen-Hsiung Lin 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 820 KB

Autothermal reforming of methane includes steam reforming and partial oxidizing methane. Theoretically, the required endothermic heat of steam reforming of methane could be provided by adding oxygen to partially oxidize the methane. Therefore, combining the steam reforming of methane with partial ox