✦ LIBER ✦

K1 solutions for an edge-cracked strip

✍ Scribed by Cheng Weili; Iain Finnie

Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 477 KB
Volume: 31
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(88)90065-3

No coin nor oath required. For personal study only.

✦ Synopsis

Stress intensity factor solutions for very shallow and very deep cracks in an edge-cracked strip are discussed. Expressions are presented for both cases which appear to be more accurate and easier to apply than those in the literature. Based on the treatment of these two limiting cases an expression is proposed for any ratio of crack size to strip width.

📜 SIMILAR VOLUMES

KII solutions for an edge-cracked strip

✍ Weili Cheng; Iain Finnie 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 401 KB

Edge crack in an orthotropic strip

✍ Anil Kumar; H. Parhi 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 453 KB

The problem of determining the distribution of stresses and the deformations of an orthotropic strip, damaged by a crack normal to the edges of the strip, is investigated. The strip is deformed by pressure applied to the faces of the crack. Two types of boundary conditions are considered: (i) the bo

Edge crack in a strip of an elastic soli

Edge crack in a strip of an elastic solid

✍ Uwadiegwu B.C.O. Ejike 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 672 KB

Deformation of an edge-cracked strip sub

Deformation of an edge-cracked strip subjected to normal surface traction on the crack faces

✍ W. Cheng; I. Finnie; Ö. Vardar 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 770 KB

New solutions for stresses due to a pair of horizontal or vertical forces acting symmetrically on the surface of a strip are obtained and shown to be easier to evaluate than those that are available in the literature. The displacements and strains on the surface due to a normal stress distribution o

Analysis for an adhesively bonded finite

Analysis for an adhesively bonded finite strip repair to a cracked plate

✍ Liu Tierang; Fan Weixun 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 682 KB

AI&met-A plate with a crack, repaired by an adhesively bonded overlay of a finite strip, is investigated. In the analysis model it is assumed that due to high stress concentration an internal debonding between the strip and the plate may generate from the crack surfaces or, in other words, it is ass

On the conventional K calibration equati

On the conventional K calibration equations for single-edge-cracked tension specimens

✍ K.-C. Wan; G.S. Chen; M. Gao; R.P. Wei 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 299 KB