Juniper wood as a possible implant material
β Scribed by Gross, K. A. ;Ezerietis, E.
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 405 KB
- Volume
- 64A
- Category
- Article
- ISSN
- 0021-9304
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Natural materials, such as wood and bone, possess structures fulfilling the requirements of support and transport of nutrients. Similarity in function and properties provides inspiration for investigating the possible use of wood as an implant material. Juniperus communis wood is dense, durable, and strong and has naturally impregnated essential oils that display antiseptic properties. This study investigated the toxicity of the oil, the effect of sterilization on the mechanical properties of the wood, and bone attachment with animal studies. The possible toxicity of the oil was determined orally and by intravenous injection. At low concentrations, the dose that would be released by the wood in the body could be tolerated without any detrimental effects. Sterilization of the wood in boiling water lowered the elastic modulus and modulus of rupture to a level at which the elastic modulus could be better matched to bone. Wood shaped into the form of femoral implants were implanted into rabbits and displayed good acceptance by the body up to a period of 3 years, indicating bone apposition, abutment into pores, and growth into drilled cavities. Β© 2003 Wiley Periodicals, Inc. J Biomed Mater Res 64A: 672β683, 2003
π SIMILAR VOLUMES
## Abstract In this study authors aim to produce carbon foams with controllable pore size and distribution with high ratio of open porosity and to determine the cytotoxicity, and the bioβcompatibility of the carbon foams by controlled experiments on the Dawley rats. Carbon foams are produced from M
Measurements were made of the principal components of the creep compliance tensor in the radial-longitudinal and the ~angential-longitudinal planes of Douglas-fir at 10 percent moisture content. Extensional creep compliance measurements at angles to the grain were also made. The results show that cr
The potential of a bis-GMA composite resin as implant material in bone is evaluated The material is claimed to have mechanical and physical properties superior to those of the bone cements used today A groove made in the cortex of the tibia in 18 rats was filled with bis-GMA, while a similar groove