## Abstract The effect of 0.6 wt.% yttrium addition on the oxidation behaviour of the coating material Niβ23Coβ19Crβ12Al was studied under isothermal and thermal cycling conditions in air at 1373 and 1473 K. The reaction was followed thermogravimetrically while the SEM, EDX, EPMA and Xβray diffract
Joint influence of cerium and boron on the oxidation behaviour of Ni3Al alloy
β Scribed by Zexi Yuan; Shenhua Song; Tianhui Xi; Xiju Zhang; Zongsen Yu
- Publisher
- Springer
- Year
- 1996
- Tongue
- English
- Weight
- 316 KB
- Volume
- 15
- Category
- Article
- ISSN
- 0261-8028
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The isothermal and thermal cycling oxidation behaviour of a directionally solidified Ni-Al-Cr3C2 eutectic alloy at temperatures from 800" to 1200 OC in flowing air have been investigated using several physical techniques. A t all temperatures an initial, protective, external layer of a-A12 O3 develo
Evolution of tribological properties of electroless Ni-P and Ni-P-Al 2 O 3 coating on an Al-10Si-0.3Mg casting alloy during heat treatment is investigated in this work. The pre-treated substrate was plated using a bath containing nickel hypophosphite, nickel lactate and lactic acid. For preparation
A first-principles method is employed to investigate the segregation behaviors of hydrogen and boron in Ni-based and Ni 3 Al-based alloys using two models. Chemical binding energy analysis shows that both boron and hydrogen are able to segregate to the interstices in the Ni phase, Ni 3 Al phase and