𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Isothermal curing of an uncatalyzed dicyanate ester monomer: Kinetics and modeling

✍ Scribed by Olivier Georjon; Jocelyne Galy; Jean-Pierre Pascault


Book ID
102738374
Publisher
John Wiley and Sons
Year
1993
Tongue
English
Weight
906 KB
Volume
49
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


The isothermal cure of a dicyanate ester monomer has been studied under different atmospheres (air and argon) without any catalyst, by following the evolutions of both glass transition temperature and conversion. Independently of both atmosphere and temperature of cure, there is a unique one-to-one relationship between these two parameters, correctly described by a restated DiBenedetto's equation. The chemical kinetics are satisfactorily modeled with two competing reactions schemes, which are second-order and second-order autocatalyzed, the latter displaying more relative importance under air-curing conditions. Whatever the cure temperature may be, gelation occurs around 0.60 conversion under air, whereas the theoretical rgel = 0.50 is experimentally observed under argon. The timetemperature-transformation diagrams have been established. 0 1993 John Wiley & Sons, Inc.


📜 SIMILAR VOLUMES


Kinetic Analysis of Isothermal and Nonis
✍ François-Xavier Perrin; Thi Minh Hanh Nguyen; Jean-Louis Vernet 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 232 KB

## Abstract Model‐free and model‐fitting kinetic approaches were applied to isothermal and nonisothermal DSC data on epoxy cure. The dependence of the effective activation energy on the extent of cure was determined using integral and differential isoconversional methods. A different shape of the d

Isothermal and nonisothermal cure kineti
✍ Ivan Brnardic; Marica Ivankovic; Hrvoje Ivankovic; Helena Jasna Mencer 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 135 KB 👁 1 views

## Abstract The effect of an octadecylammonium‐exchanged montmorillonite on the curing kinetics of a thermoset system based on a bisphenol A epoxy resin and a poly(oxypropylene)diamine curing agent were studied with differential scanning calorimetry (DSC) in isothermal and dynamic (constant‐heating

TTT-cure diagram of an anhydride-cured e
✍ H. Teil; S. A. Page; V. Michaud; J.-A. E. Månson 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 263 KB 👁 2 views

## Abstract The curing reaction of an epoxy resin [diglycidyl ether of bisphenol A (DGEBA)] combined with a methyl‐hexahydrophtalic anhydride (MHHPA) hardener and a benzyldimethylamine (BDMA) accelerator was studied over a temperature range of 60–140°C to build its isothermal time‐temperature‐trans