Isothermal crystallization kinetics of poly(3-hydroxybutyrate)/layered double hydroxide nanocomposites
✍ Scribed by Sung-Fu Hsu; Tzong-Ming Wu; Chien-Shiun Liao
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 417 KB
- Volume
- 44
- Category
- Article
- ISSN
- 0887-6266
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Poly(3‐hydroxybutyrate) (PHB)/layered double hydroxides (LDHs) nanocomposites were prepared by mixing PHB and poly(ethylene glycol) phosphonates (PEOPAs)‐modified LDH (PMLDH) in chloroform solution. Both X‐ray diffraction data and TEM micrographs of PHB/PMLDH nanocomposites indicate that the PMLDHs are randomly dispersed and exfoliated into the PHB matrix. In this study, the effect of PMLDH on the isothermal crystallization behavior of PHB was investigated using a differential scanning calorimeter (DSC) and polarized optical microscopy. Isothermal crystallization results of PHB/PMLDH nanocomposites show that the addition of 2 wt % PMLDH into PHB induced more heterogeneous nucleation in the crystallization significantly increasing the crystallization rate and reducing their activation energy. By adding more PMLDH into the PHB probably causes more steric hindrance of the diffusion of PHB, reducing the transportation ability of polymer chains during crystallization, thus increasing the activation energy. The correlation among crystallization kinetics, melting behavior and crystalline structure of PHB/PMLDH nanocomposites can also be discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3337–3347, 2006
📜 SIMILAR VOLUMES
## Abstract Poly(ϵ‐caprolactone) (PCL)/layered double hydroxide (LDH) nanocomposites were prepared successfully via simple solution intercalation. The nonisothermal melt crystallization kinetics of neat PCL and its LDH nanocomposites was investigated with the Ozawa, Avrami, and combined Avrami–Ozaw
## Abstract The preparation and properties of nanocomposites, consisting of a poly(3‐Hydroxybutyrate‐__co__‐3‐hydroxyvalerate) and an organophilic clay are described. The effect of organophilic clay on the crystallization behavior of (PHBV) was studied. A differential scanning calorimeter (DSC) was
## Abstract Poly(butylene terephthalate) (PBT)/organo‐attapulgite (ATT) nanocomposites containing 2.5 and 5 wt % nanoparticles loadings were fabricated via a simple melt‐compounding approach. The crystal structure and isothermal crystallization behaviors of PBT composites were studied by wide‐angle