## Abstract Based on a previous study of the irreversible sorption of benzene in sandy aquifer materials, we further investigated a method to quantify an irreversible sorption coefficient of aqueous benzene. Assuming that the rate of irreversible loss from the solution to the sorption sites followe
Irreversible sorption of benzene in sandy aquifer materials
β Scribed by Doo-Sung Baek; Song-Bae Kim; Dong-Ju Kim
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 209 KB
- Volume
- 17
- Category
- Article
- ISSN
- 0885-6087
- DOI
- 10.1002/hyp.1181
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Hydrocarbon compounds in aquifers are generally known to show a retardation effect due to sorption onto the surfaces of solid particles. In this study, we investigated the effect of sorption on the transport of benzene in sandy aquifer materials by conducting batch and column tests for both sandy aquifer materials and sandy materials to which had been added 0Β·5% powdered activated carbon. The batch test was conducted by equilibrating dry materials with benzene solutions of various initial concentrations, and by analysing the concentrations of benzene in the initial and equilibrated solutions using highβperformance liquid chromatography (HPLC). The column test was performed to monitor the concentrations of effluent versus time, known as a breakthrough curve (BTC). We injected KCl and benzene solutions as tracers into the inlet boundary as two different types of square pulse and step, and monitored the effluent concentrations at the exit boundary under a steadyβstate condition using an electrical conductivity meter and HPLC. Simulation of benzene transport was performed using the convectiveβdispersive equation model with the distribution coefficients obtained from the batch test and the transport parameters of the conservative solute KCl from the column test. The observed BTCs of KCl and benzene for pulse injection showed that the arrival times of the peaks of both tracers coincided well, but the relative peak concentration of benzene was much lower than that of KCl. Comparison of the simulated and observed BTCs showed a great discrepancy for all cases of injection mode and material texture, indicating the absence of retardation effect. These results reveal that the predominant process affecting the benzene transport in the sandy aquifer materials is an irreversible sorption rather than retardation. This tentative conclusion was verified by simulation of benzene transport using an irreversible sorption parameter that led to a good agreement between the simulated and observed BTCs. Copyright Β© 2002 John Wiley & Sons, Ltd.
π SIMILAR VOLUMES
## Abstract Study of the mobility of contaminants in an aquifer is an important issue for the proper remediation of contaminated groundwater. Determination of associated solute transport parameters therefore is essential for investigation of the extent to which groundwater can be contaminated. This