๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Iridium oxide pH microelectrode

โœ Scribed by Paulus VanHoudt; Zbigniew Lewandowski; Brenda Little


Publisher
John Wiley and Sons
Year
1992
Tongue
English
Weight
811 KB
Volume
40
Category
Article
ISSN
0006-3592

No coin nor oath required. For personal study only.

โœฆ Synopsis


The manufacture, calibration, and signal conditioning during construction of an iridiumhidium oxide pH microsensor is described. The microsensor was designed to be used extracellularly, primarily in biofilm research. The sensing tip diameters were typically in the range of 3-15 pm. The iridium oxide was formed by potential cycling in dilute sulfuric acid. A pH profile across a denitrifying biofilm was measured as an example of an application. The higher Nernstian slope (70-80 mV/pH for fresh electrodes), increased rigidity, and restriction of the sensing tip to the outermost end of the electrode are features which make the iridiumhridium oxide pH microelectrode superior to a glass microelectrode.


๐Ÿ“œ SIMILAR VOLUMES


A glass-membrane pH microelectrode
โœ Leo R. Pucacco; Norman W. Carter ๐Ÿ“‚ Article ๐Ÿ“… 1976 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 706 KB

By miniaturizing the original MacInnes and Dole glass-membrane pH electrode a new pH microelectrode has been developed. The technique developed utilizes the tip of a high electrical resistance glass pipet that can be sealed with a thin membrane of H+-sensitive glass. Single-barreled electrodes have

A Novel Combinational pH-P(CO2) Microele
โœ X.H. Rao; Y.L. Ma ๐Ÿ“‚ Article ๐Ÿ“… 1993 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 265 KB

A novel combinational \(\mathrm{pH}-\boldsymbol{P}_{\mathrm{CO}_{2}}\) microelectrode based on a neutral carrier hydrogen ion exchanger is described. It is easy to fabricate and allows \(\mathrm{pH}\) and \(\boldsymbol{P}_{\mathbf{C O}_{\mathbf{2}}}\) to be measured simultaneously. The microelectrod

A carbon dioxide air-gap microelectrode
โœ Yilong Ma ๐Ÿ“‚ Article ๐Ÿ“… 1990 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 360 KB

A relatively simple potentiometric pCO2 gas-sensing microelectrode is described. It is based on an ion-exchanger pH electrode, has a 2- to 5-microns tip, and has an air gap which is formed by means of hydrophobic treatments. The microelectrode exhibits a linear response in the range 10(-4)-10(-2) M