𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Investigation of the structure and mechanical properties of filled polyethylene

✍ Scribed by V. I. Grigor'ev; V. P. Gordienko; A. N. Tynnyi

Publisher
Springer
Year
1975
Tongue
English
Weight
545 KB
Volume
9
Category
Article
ISSN
1573-885X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The Mechanical Properties of Particulate
The Mechanical Properties of Particulate-filled Aramid and Polyethylene Laminates
✍ Wang, Z. P.; Ghotra, J. S.; Pritchard, G.; Rose, R. G. πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 144 KB πŸ‘ 2 views

Some mechanical properties of particulate-Ðlled polyethylene/epoxy and aramid/epoxy laminates are reported, following earlier work with particulate-Ðlled glass/epoxy laminates. The behaviour of the organic Ðbre laminates was di †erent from that of glass Ðbre ones, investigated and reported earlier.

Aluminium-filled low-density polyethylen
Aluminium-filled low-density polyethyleneβ€”structural, morphological, and mechanical properties
✍ M. D. Dasture; D. S. Kelkar πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 388 KB πŸ‘ 2 views

## Abstract Low‐density polyethylene (LDPE) was filled with aluminium (Al) powder having concentrations of 1, 4, and 6% w/w. The samples in the form of disc containing the above concentration of Al powder were obtained using hot press molder. The structural properties have been investigated using d

Mechanical properties of iron powder fil
Mechanical properties of iron powder filled high density polyethylene composites
✍ Ali Gungor πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science βš– 535 KB

Mechanical properties of high density polyethylene (HDPE) and HDPE containing 5, 10 and 15 vol.% Fe polymer composites were investigated experimentally. Composite materials were prepared with a twin screw extruder and injection moulding. Microstructure of fracture surface, yield and tensile strength