✦ LIBER ✦

Investigation of the performance of carbide cutting tools with hard coatings in hard milling based on the response surface methodology

✍ Scribed by Çalışkan, Halil; Kurbanoğlu, Cahit; Panjan, Peter; Kramar, Davorin

Book ID: 115465068
Publisher: Springer
Year: 2012
Tongue: English
Weight: 876 KB
Volume: 66
Category: Article
ISSN: 0268-3768
DOI: 10.1007/s00170-012-4374-y

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On the prediction of surface roughness i

On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations

✍ Hessainia, Zahia; Belbah, Ahmed; Yallese, Mohamed Athmane; Mabrouki, Tarek; Riga 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 604 KB

Investigating the machinability evaluati

Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology

✍ Jenn-Tsong Horng; Nun-Ming Liu; Ko-Ta Chiang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 985 KB

In this study a series of tests were conducted in order to investigate the machinability evaluation of Hadfield steel in the hard turning. The austenitic Hadfield steels, containing about 1.0-1.2% C and 11-14% Mn in mass, have excellent wear-resistance property and are extensively used in various en

Effect of the carbon content in hard all

Effect of the carbon content in hard alloys on the rate of growth of coatings of titanium carbide and durability of tools with these coatings. I. Examination of the role of carbon of hard alloys in depositing coatings of titanium carbide

✍ G. L. Platonov; R. F. Cheburaeva; V. S. Toropchenov; S. A. Kiryukhin; I. Yu. Kon 📂 Article 📅 1989 🏛 Springer 🌐 English ⚖ 459 KB

Environmentally conscious hard turning o

Environmentally conscious hard turning of cemented carbide materials on the basis of micro-cutting in SEM: stressing four kinds of cemented carbides with PCD tools

✍ Sung Jung Heo 📂 Article 📅 2008 🏛 Springer-Verlag 🌐 English ⚖ 906 KB

Effect of carbon content in hard alloys

Effect of carbon content in hard alloys on the rate of titanium carbide coating growth and the strength of tools with these coatings. II. Study of the effect of carbon content on the operating capacity of tools and coatings

✍ G. L. Platonov; R. F. Cheburaeva; V. S. Toropchenov; S. A. Kiryukhin; I. Yu. Kon 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 366 KB