✦ LIBER ✦

Investigation of metal flow and temperatures by FEM in the extrusion of Ti-6Al-4V tubes

✍ Scribed by T. Udagawa; E. Kropp; T. Altan

Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 800 KB
Volume: 33
Category: Article
ISSN: 0924-0136
DOI: 10.1016/0924-0136(92)90317-l

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A combined UBET/FEM investigation of met

A combined UBET/FEM investigation of metal flow and stress analysis of dies in extrusion processes

✍ A.S. Wifi; Z.S. Abduljabbar; M.T. Sakr 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 361 KB

Constitutive analysis of the high-temper

Constitutive analysis of the high-temperature deformation mechanisms of Ti–6Al–4V and Ti–6.85Al–1.6V alloys

✍ Jeoung Han Kim; S.L. Semiatin; Chong Soo Lee 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 874 KB

Cooling approaches and cutting temperatu

Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V

✍ Shane Y Hong; Yucheng Ding 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 505 KB

Cryogenic machining is an environmentally safe alternative to conventional emulsion cooling. In this study, liquid nitrogen (LN2) is applied to cutting Ti-6Al-4V, a difficult-to-machine but widely used material in aerospace industry. With the goal of identifying the cooling approach for most effecti

The transition effect in the cyclic temp

The transition effect in the cyclic temperature creep of Ti-6Al-4V

✍ I. Palchan 📂 Article 📅 1980 🏛 Elsevier Science ⚖ 484 KB

The fretting wear of Ti-6Al-4v and aged

The fretting wear of Ti-6Al-4v and aged inconel 718 at elevated temperatures

✍ M.M. Hamdy; R.B. Waterhouse 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 809 KB

Additive manufacturing of Ti–6Al–4V comp

Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties

✍ Bernd Baufeld; Omer Van der Biest; Rosemary Gault 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 536 KB