✦ LIBER ✦

Inverse gas chromatography: A valuable method for the surface characterization of fillers for polymers (glass fibres and silicas)

✍ Scribed by E. Papirer; H. Balard; A. Vidal

Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 664 KB
Volume: 24
Category: Article
ISSN: 0014-3057
DOI: 10.1016/0014-3057(88)90015-8

No coin nor oath required. For personal study only.

✦ Synopsis

Inverse gas chromatography (IGC) is most useful for the study of the surface characteristics of powders, such as silicas and glass fibres, which can hardly be examined otherwise. Examples are provided to illustrate the potential of IGC measurements either at finite concentration or at infinite dilution chromatographic conditions. It is shown that the interpretation of the results is facilitated when studying solid surfaces modified in a controlled way.

📜 SIMILAR VOLUMES

A new method for the preparation of high

A new method for the preparation of high capacity glass beads for gas liquid and supercritical fluid chromatography

✍ Green, S. ;Bertsch, W. 📂 Article 📅 1987 🏛 John Wiley and Sons 🌐 English ⚖ 311 KB 👁 1 views

Inverse gas chromatography for the deter

Inverse gas chromatography for the determination of the dispersive surface free energy and acid–base interactions of a sheet molding compound. I. Matrix material and glass

✍ Ryan H. Mills; William T. Y. Tze; Douglas J. Gardner; Adriaan van Heiningen 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 125 KB 👁 2 views

A method for assessing the effect of pol

A method for assessing the effect of polymer sheeting rheology, surface pattern, and processing conditions on glass lamination

✍ Yi-Je Juang; Denitra Bruer; L. James Lee; Kurt W. Koelling; Narayanan Srinivasan 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 269 KB 👁 2 views

Rapid method for the analysis of a varie

Rapid method for the analysis of a variety of chemical classes of pesticides in surface and ground waters by off-line solid-phase extraction and gas chromatography-ion trap mass spectrometry

✍ J. Patsias; E. Papadopoulou-Mourkidou 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 990 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB