𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Interfacial sticking and slipping in the friction stir welding process

✍ Scribed by Judy Schneider; Ronald Beshears; Arthur C. Nunes Jr.

Publisher
Elsevier Science
Year
2006
Tongue
English
Weight
556 KB
Volume
435-436
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The influence of stirrer geometry on bon
The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process
✍ Mustafa Boz; Adem Kurt πŸ“‚ Article πŸ“… 2004 πŸ› Elsevier Science βš– 497 KB

In this study, Al 1080 alloy materials were welded using friction stir welding process. The influence of stirrer design on the welding process was investigated. For this purpose, five different stirrers, one of them square cross-sectioned and the rest were cylindrical with 0.85, 1.10, 1.40 and 2.1 m

Grain refinement process in commercial 7
Grain refinement process in commercial 7075-T6 aluminum alloy under friction stir welding and superplasticity
✍ Y. Motohashi; T. Sakuma; A. Goloborodko; T. Ito; G. Itoh πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 296 KB

## Abstract **About the influence of substrate roughness and spray particle size on the adhesion of thermal spray coatings** Process of grain refinement taking place during friction stir welding of a 7075‐T6 Al alloy was studied. It appears that the fine‐grained structure is formed by the grain fr

Back-of-the-envelope calculations in fri
Back-of-the-envelope calculations in friction stir welding – Velocities, peak temperature, torque, and hardness
✍ A. Arora; T. DebRoy; H.K.D.H. Bhadeshia πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 644 KB

Given the complexity and resource requirements of numerical models of friction stir welding (FSW), well-tested analytical models of materials flow, peak temperatures, torque, and weld properties are needed. Here an approximate analytical technique for the calculation of three-dimensional material fl