Abstract
Summary: We describe the results of Monte Carlo simulations, based on the cooperative motion algorithm, of the lamellar structure generated at finite temperature by a symmetric diblock copolymer. The (70 × 70 × 70) simulation box in which the polymer chains were embedded for each simulation was rotated, based on the interface orientation, to bring the interfacial planes of the simulated structure into parallel. We found that the interface thickness, as defined by the distribution of the junction points, became narrower at lower temperature, and that the interface plane was characterized by a waviness with a maximum peak‐to‐valley distance of 20–30 lattice bonds. Compared with the isotropic state (T/N = ∞), chains at lower temperatures were stretched in the direction perpendicular to the interface; but only modestly compressed in the direction parallel to the interface. Individual block chains within the lamellar domains still behave like random coils. The block copolymer molecules exhibit only a modest tendency to orient themselves with their end‐to‐end vector perpendicular to the plane of the lamellar interface. Considered as an ensemble average, the results we obtained are similar to those reported from small angle neutron scattering measurements for the mean conformation of the PS__d__ blocks of symmetrical PS__d__‐PVP diblock copolymers.
2‐D projections onto the X‐Z plane of the end beads for the A‐ and B‐chains (gray) and the junction points J (black) at T/N = 0.2. The interface plane is oriented parallel to the Y‐Z plane by rotating the simulation box. The distribution profiles of junction points and the end beads across the system in the direction of interface normal are shown in the lower part of the figure.
image2‐D projections onto the X‐Z plane of the end beads for the A‐ and B‐chains (gray) and the junction points J (black) at T/N = 0.2. The interface plane is oriented parallel to the Y‐Z plane by rotating the simulation box. The distribution profiles of junction points and the end beads across the system in the direction of interface normal are shown in the lower part of the figure.