✦ LIBER ✦

INTERACTIONS BETWEEN COMMENSURATE PARAMETRIC AND FORCING EXCITATIONS IN A SYSTEM WITH CLEARANCE

✍ Scribed by A. Kahraman; G.W. Blankenship

Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 791 KB
Volume: 194
Category: Article
ISSN: 0022-460X
DOI: 10.1006/jsvi.1996.0361

No coin nor oath required. For personal study only.

✦ Synopsis

The steady state forced response of a system with clearance subject to commensurate parametric and external forcing excitation is investigated analytically by considering a mechanical oscillator with time-varying stiffness and a dead zone type clearance non-linearity. A generalized multiple term harmonic balance procedure is utilized to find period-h (hT) solutions with h e 1. Interactions between periodically time-varying stiffness and forcing functions are characterized in the primary resonance regimes where solutions are mostly of 1T type. Closed form expressions for impact criteria are derived for 1T solutions where possible. The effects of system parameters on hT subharmonic resonances are examined and experimental results are included which conclusively demonstrate the existence of subharmonic resonances in geared systems.

📜 SIMILAR VOLUMES

Steady state forced response of a mechan

Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearity

✍ G.W. Blankenship; A. Kahraman 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 971 KB

A mechanical system exhibiting combined parametric excitation and clearance type non-linearity is examined analytically and experimentally in an effort to explain complex behavior that is commonly observed in the steady state forced response of rotating machines. The specific case of a preloaded mec

Copper(II) ions as a factor interfering

Copper(II) ions as a factor interfering in the interaction between bioligands in systems with adenosine and polyamines

✍ Lechoslaw Lomozik; Anna Gasowska; Leszek Bolewski 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 836 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB