𝔖 Bobbio Scriptorium

✦ LIBER ✦

Interaction force measurements using atomic force microscopy for characterization and control of adhesion, dispersion and lubrication in particulate systems

✍ Scribed by Esayanur, Madhavan S.; Yeruva, Suresh B.; Rabinovich, Yakov I.; Moudgil, Brij M.

Book ID: 120000401
Publisher: Taylor and Francis Group
Year: 2005
Tongue: English
Weight: 287 KB
Volume: 19
Category: Article
ISSN: 0169-4243
DOI: 10.1163/1568561054890516

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Using the Adhesive Interaction between A

Using the Adhesive Interaction between Atomic Force Microscopy Tips and Polymer Surfaces to Measure the Elastic Modulus of Compliant Samples

✍ Sun, Yujie; Akhremitchev, Boris; Walker, Gilbert C. 📂 Article 📅 2004 🏛 American Chemical Society 🌐 English ⚖ 200 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB

An innovative method for estimating the

An innovative method for estimating the roll angle in two-wheeled vehicles is proposed. the roll angle is a crucial variable in the dynamics of two-wheeled vehicles, since it greatly affects the behaviour of the tire-road contact forces. hence, the capability of providing in real time a reliable measure of such quantity allows us to evaluate the dynamic properties of the vehicle and its tyres, and represents the enabling technology for the design of advanced braking, traction and stability control systems. the method proposed is based on a lowcost sensor configuration, suitable for industrial purposes. the validity of the proposed approach is assessed in a multi-body motorbike simulator environment and also on an instrumented test vehicle.

✍ Boniolo, I.; Savaresi, S.M.; Tanelli, M. 📂 Article 📅 2009 🏛 The Institution of Engineering and Technology 🌐 English ⚖ 1001 KB