𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Interaction effect crack–interfacial crack using finite element method

✍ Scribed by D. Ouinas; A. Hebbar; B. Bachir Bouiadjra; N. Benderdouche; B. Serier

Publisher
Elsevier Science
Year
2010
Weight
998 KB
Volume
31
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Modelling dynamic crack propagation usin
Modelling dynamic crack propagation using the scaled boundary finite element method
✍ E. T. Ooi; Z. J. Yang 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 910 KB

## Abstract This study presents a novel application of the scaled boundary finite element method (SBFEM) to model dynamic crack propagation problems. Accurate dynamic stress intensity factors are extracted directly from the semi‐analytical solutions of SBFEM. They are then used in the dynamic fract

Prediction of fatigue crack growth rates
Prediction of fatigue crack growth rates using crack closure finite element analysis
✍ Hassan Alizadeh; Sarinova Simandjuntak; David Smith; Martyn Pavier 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 177 KB

A three-dimensional finite element fatigue crack closure model of a corner crack and of a through thickness crack has been developed to evaluate the range of effective stress intensity factor from the distribution of the range of stress ahead of the crack tip. The corresponding fatigue crack growth

A new method for modelling cohesive crac
A new method for modelling cohesive cracks using finite elements
✍ G. N. Wells; L. J. Sluys 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 175 KB

## Abstract A model which allows the introduction of displacements jumps to conventional finite elements is developed. The path of the discontinuity is completely independent of the mesh structure. Unlike so‐called ‘embedded discontinuity’ models, which are based on incompatible strain modes, there

Finite element model and experimental an
Finite element model and experimental analysis of crack–inclusion interaction
✍ R. Li; S. Wu; E. Ivanova; A. Chudnovsky; K. Sehanobish; C. P. Bosnyak 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 995 KB

One of the key requirements for developing tough multiphase blend systems, for example, selecting the type of discrete phases (hard or soft) in a polymer matrix, is the ability to predict the fracture path. Most of these selections rely heavily on prior experience or on intuitive rationale. There ar