✦ LIBER ✦

Integrated seal for high-temperature electrochemical device

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 123 KB
Volume: 2010
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(10)70099-4

No coin nor oath required. For personal study only.

✦ Synopsis

are coupled by lodging the spiral into a channel of the gasket -creating the assembly. The gasket is evenly coupled in the outer circumference of the spiral, in which a cushion plate (made from a resilient material) is installed. Breakage of the gasket during assembly of the outer pipe is effectively prevented and the post-assembly seal between the spiral and the outer pipe is stabilised.

📜 SIMILAR VOLUMES

Sealed joint structure for electrochemic

Sealed joint structure for electrochemical device

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 128 KB

A blow moulding apparatus, comprising: a number of mould shells that has a seal around the periphery in the gap between the mould shells to prevent ingress of air to mould.

High temperature materials for seal ring

High temperature materials for seal rings

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 617 KB

Seal for high-pressure liquid chromatogr

Seal for high-pressure liquid chromatography devices

📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 269 KB

Side view of seal mounted in pump head of high-pressure pump, with prior art on the left and the seal described in WO 2004/048823 on the right.

High-pressure, high-temperature seal for

High-pressure, high-temperature seal for downhole use

📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 256 KB

A magnetic fluid seal in which the poles on the stator are an oval shaped projection (3). This is claimed to provide low rotational resistance and starting torque.

Epoxy compound for high temperature seal

Epoxy compound for high temperature sealing

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 105 KB

## Static sealing and Testing (BAM) and the Technical Advisory Federation of Bavaria in German, (Materials and Structural Engineering Division, Quality Monitoring) (TUV).

High temperature gasket for controlled s

High temperature gasket for controlled sealing

📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 514 KB

low pressure seal and cured fast enough to permit an on-line 5.5 bar air pressure test. Typical shear strength (as indicated by ASTM D1002 and DIN 53283 tests) of the cured sealant is 5-12 N/mm21 Sealant 574 has WRC approval for use in water applications.