๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Instrumented impact testing of glass reinforced polypropylene

โœ Scribed by A. Golovoy

Publisher
Society for Plastic Engineers
Year
1985
Tongue
English
Weight
491 KB
Volume
25
Category
Article
ISSN
0032-3888

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Molding and torsional testing of tubular
Molding and torsional testing of tubular specimens of glass fiber-reinforced polypropylene
โœ S. N. Pandit; V. B. Gupta ๐Ÿ“‚ Article ๐Ÿ“… 1981 ๐Ÿ› Society for Plastic Engineers ๐ŸŒ English โš– 461 KB

## Abstract This paper describes a torsion pendulum based on the free vibration method and designed for studies on tubular samples. The design and fabrication of the injection mold used for molding the tubular specimens is also described. Tubular specimens were injection molded form polypropylene a

Application of instrumented impact test
Application of instrumented impact test in polymer testing
โœ J. C. Radon ๐Ÿ“‚ Article ๐Ÿ“… 1978 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 918 KB

## Abstract Advanced methods of conducting and analyzing instrumented Charpy impact tests are described and used in measuring the initiation fracture toughness __K__~1__c__~ at a range of impact velocities and temperatures. Improvements developed in the impact testing of metals are discussed and ap

Instrumented impact testing of castor-oi
Instrumented impact testing of castor-oil-based polyurethanes
โœ T. M. Liu; V. T. Bui ๐Ÿ“‚ Article ๐Ÿ“… 1995 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 550 KB

Instrumented impact testing has been used to study castor-oil-based polyurethanes. The energy-absorbed capacity of these materials in impact is dependent on several factors, such as the type of isocyanate, NCO/OH ratio, and testing temperature. An approximate but simple method for the low-temperatur