The performances of three wood-based activated carbons as adsorbents of hydrogen sulfide were evaluated by dynamic breakthrough testing. The subsequent products of H 2 S oxidation on the carbon surfaces were analyzed. The adsorbents were studied using sorption of nitrogen, thermal analysis, Boehm ti
Initial Heats of H2S Adsorption on Activated Carbons: Effect of Surface Features
β Scribed by Andrey Bagreev; Foad Adib; Teresa J Bandosz
- Publisher
- Elsevier Science
- Year
- 1999
- Tongue
- English
- Weight
- 85 KB
- Volume
- 219
- Category
- Article
- ISSN
- 0021-9797
No coin nor oath required. For personal study only.
β¦ Synopsis
The sorption of hydrogen sulfide was studied on activated carbons of various origins by means of inverse gas chromatography at infinite dilution. The conditions of the experiment were dry and anaerobic. Prior to the experiments the surface of some carbon samples was oxidized using either nitric acid or ammonium persulfate. Then the structural parameters of carbons were evaluated from the sorption of nitrogen. From the IGC experiments at various temperatures, heats of adsorption were calculated. The results showed that the heat of H 2 S adsorption under dry anaerobic conditions does not depend on surface chemistry. The dependence of the heat of adsorption on the characteristic energy of nitrogen adsorption calculated from the Dubinin-Raduskevich equation was found. This correlation can be used to predict the heat of H 2 S adsorption based on the results obtained from nitrogen adsorption.
π SIMILAR VOLUMES
Three wood-based commercial activated carbons supplied by Westvaco were studied as adsorbents of hydrogen sulfide. The initial materials were characterized using sorption of nitrogen, Boehm titration, potentiometric titration, water sorption, thermal analysis, and temperature-programmed desorption.
The adsorption characteristics of activated carbon treated with 30 wt% HCl and 30 wt% NaOH were investigated. The acid and base values were determined by Boehm's method and the surface structures were studied by the BET method with N 2 adsorption and iodine adsorption capacity. Also the adsorption p
A carbon of wood origin was oxidized with different oxidizing agents (nitric acid, hydrogen peroxide, and ammonium persulfate). The microstructural properties of the starting material and the oxidized samples were characterized using sorption of nitrogen. The surface acidity was determined using Boe
## Abstract The adsorption of __Escherichia coli__ on different activated carbons has been studied. The activated carbon samples used have been characterized, determining their surface area, pore size distribution, elemental analysis, mineral matter analysis and pH of the point of zero charge. The