✦ LIBER ✦

Influences of heating temperature on mechanical properties of polydimethylsiloxane

✍ Scribed by Miao Liu; Jianren Sun; Quanfang Chen

Publisher: Elsevier Science
Year: 2009
Tongue: English
Weight: 470 KB
Volume: 151
Category: Article
ISSN: 0924-4247
DOI: 10.1016/j.sna.2009.02.016

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation, morphology, and mechanical

Preparation, morphology, and mechanical properties of elastomers based on polydimethylsiloxane/ polystyrene blends

✍ Jian Dong; Naiqiang Zhang; Zonglin Liu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 271 KB 👁 2 views

The effect of heat sealing temperature o

The effect of heat sealing temperature on the properties of OPP/CPP heat seal. I. Mechanical properties

✍ Tsujii Tetsuya; U. S. Ishiaku; Machiko Mizoguchi; Hiroyuki Hamada 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 419 KB 👁 2 views

## Abstract The effect of heat sealing temperature on the mechanical properties and morphology of OPP/CPP laminate films was investigated. The laminated films were placed in an impulse type heat sealing machine with both CPP sides facing each other. The temperatures investigated ranged from 100 to

Influence of Intermetallic Precipitates

Influence of Intermetallic Precipitates and Heat Treatment on the Mechanical Properties of High-Temperature Corrosion Resistant Ferritic Steels

✍ N. Nabiran; S. Weber; W. Theisen 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 313 KB

Effects of polydimethylsiloxane concentr

Effects of polydimethylsiloxane concentration on properties of polyurethane/polydimethylsiloxane hybrid dispersions

✍ Guiqiang Fei; Yiding Shen; Haihua Wang; Yue Shen 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 690 KB

Influence of heat treatment on microstru

Influence of heat treatment on microstructure and mechanical properties of iron-based coating

✍ Li Hua-yi; Li Guo-lu; Wang Hai-dou; Xu Bin-shi 📂 Article 📅 2011 🏛 Elsevier Science ⚖ 649 KB

Iron-based alloys were deposited on the low carbon steel by plasma cladding process. Furnace annealing was conducted at 600 °C for 40 min. Resulting microstructure and phases were observed and investigated by scanning electron microscopy (SEM), energy-dispersive spectrometer (EDS) and X-ray diffract

Experimental investigation on the influe

Experimental investigation on the influence of temperature on the mechanical properties of reservoir rocks

✍ Araújo, R.G.S. ;Sousa, J.L.A.O. ;Bloch, M. 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 813 KB

This paper reports an investigation on mechanical properties of reservoir rocks obtained in laboratory at room temperature, and their pertinence to characterize the actual rock behavior under normal downhole or steam injection conditions. The investigation was based on triaxial tests performed by a