𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of TiO2-Modification on the Mechanical and Thermal Properties of Sugarcane Bagasse–EVA Composites

✍ Scribed by G. D. Vilakati; A. K. Mishra; S. B. Mishra; B. B. Mamba; J. M. Thwala

Publisher
Springer
Year
2010
Tongue
English
Weight
465 KB
Volume
20
Category
Article
ISSN
1053-0495

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical and thermal properties of pol
Mechanical and thermal properties of polypropylene/sugarcane Bagasse composites
✍ B. Ramaraj 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 190 KB 👁 2 views

## Abstract To determine the possibility of using sugarcane bagasse (SCB) waste as reinforcing filler in the thermoplastic polymer matrix, SCB‐reinforced polypropylene (PP) composites were prepared. The PP and SCB composites were prepared by the extrusion of PP resin with 5, 10, 15, and 20 wt % of

The effect of processing conditions and
The effect of processing conditions and binding material on the mechanical properties of bagasse fibre composites
✍ R.G. Raj; B.V. Kokta 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 225 KB

Steam-exploded bagasse fibres (mesh size 60) were used for the fabrication of composites. Polyethylene (high, medium and linear low density) was used as binding material to improve the mechanical properties and dimensional stability of the composites. The effects of variation in processing condition

Influence of fiber modification on inter
Influence of fiber modification on interfacial adhesion and mechanical properties of pineapple leaf fiber-epoxy composites
✍ N. Lopattananon; Y. Payae; M. Seadan 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 448 KB 👁 2 views

## Abstract Three kinds of surface treatment, that is, the alkalization (5% w/v NaOH aqueous solution), the deposition of diglycidyl ether of bisphenol A (DGEBA) from toluene solution (1% w/v DGEBA), and the alkalization combined with the deposition of DGEBA (5% w/v NaOH/1% w/v DGEBA) were applied