✦ LIBER ✦

Influence of Ti on the Mechanical Properties of AgCuInTi Active Brazing Fillers

✍ Scribed by Matteo Galli; Jolanta Janczak-Rusch; Marta Szankowska

Publisher: John Wiley and Sons
Year: 2009
Tongue: English
Weight: 321 KB
Volume: 11
Category: Article
ISSN: 1438-1656
DOI: 10.1002/adem.200800310

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of Purity Level on the Structu

Influence of Purity Level on the Structural Evolution and the Mechanical Properties of the Ti–48Al Alloys

✍ Hitier, P. ;Bonnentien, J. L. ;Bertrand, C. ;Cornet, M. ;Bigot, J. 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 219 KB 👁 1 views

The influence of novel zinc hydroxystann

The influence of novel zinc hydroxystannate-coated fillers on the fire properties of flexible PVC

✍ R. G. Baggaley; P. R. Hornsby; R. Yahya; P. A. Cusack; A. W. Monk 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB

Zinc hydroxystannate (ZHS), at levels of 2-5 phr, and the hydrated fillers, magnesium hydroxide (MH) and alumina trihydrate (ATH), at levels of 20-50 phr, are effective flame retardants and smoke suppressants for flexible PVC. Novel ZHS-coated hydrated fillers are found to exhibit markedly improved

Influence of Lignin Type on the Mechanic

Influence of Lignin Type on the Mechanical Properties of Lignin Based Compounds

✍ Hansjörg Nitz; Hinnerk Semke; Rolf Mülhaupt 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 173 KB

Influence of activation temperature on t

Influence of activation temperature on the properties of polyacrylonitrile-based activated carbon hollow fiber

✍ M.-C. Yang; D.-G. Yu 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 215 KB 👁 1 views

In this work, polyacrylonitrile hollow fiber was oxidized, carbonized, and activated by carbon dioxide into activated hollow carbon fiber. The effects of the activation temperature on the characteristics of the resulting activated hollow carbon fiber, including the mechanical properties, the surface

Influence of Ti-Based Fillers on the The

Influence of Ti-Based Fillers on the Thermal Decomposition and Phase Development of Polysiloxane Derived Materials

✍ F. Hönack; R. Riedel 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 151 KB

Influence of phase microstructure on the

Influence of phase microstructure on the mechanical properties of ternary phase polypropylene composites

✍ P. R. Hornsby; K. Premphet 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 443 KB 👁 1 views

The mechanical properties and phase microstructure of ternary phase polypropylene composites have been investigated using combinations of rigid glass beads and ethylene/propylene rubber (EPR) modifiers. Particular consideration has been given to the relative interaction between these components and