The authors studied deposits from combustion chambers of high-pressure engines supplied with standard fuel (SO) and ecological fuel of City-Diesel type. Chemical analysis, X-ray diffractograms, Mo Γssbauer absorption and additionally Raman wavenumber measurements were made. The wearing of some engin
β¦ LIBER β¦
Influence of the kind of fuel oil on the deposit composition in the diesel engine combustion chamber
- Publisher
- Elsevier Science
- Year
- 2002
- Weight
- 170 KB
- Volume
- 43
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Influence of the kind of fuel oil on the
Influence of the kind of fuel oil on the deposit composition in the diesel engine combustion chamber
β
P. Tarkowski; J. SarzyΕski; P. BudzyΕski; R. Paluch; M. Wiertel
π
Article
π
2001
π
Elsevier Science
π
English
β 177 KB
The use of hazelnut oil as a fuel in pre
β
Murat Γetin; Fikret YΓΌksel
π
Article
π
2007
π
Elsevier Science
π
English
β 164 KB
The influence of engine oil on diesel ex
β
Gligorijevic, R. ;Jevtic, J. ;Biresaw, G.
π
Article
π
2004
π
John Wiley and Sons
π
English
β 440 KB
A review of combustion processes in the
β
Ghazi A. Karim
π
Article
π
1980
π
Elsevier Science
π
English
β 648 KB
Examination of lubricant oil components
β
Masato Fukui; Tadafumi Sato; Naotake Fujita; Michio Kitano
π
Article
π
2001
π
Elsevier Science
π
English
β 193 KB
In this study, influence of fuel and lubricant oil components on the combustion chamber deposit (CCD) formation was investigated using both a two-stroke engine and an autoclave. The results obtained show that the influence of lubricant oil on CCD formation was greater than that of the fuel and most
Heat loss to the combustion chamber wall
β
Yuichi Yamada; Masahiko Emi; Hiroyuki Ishii; Yasuko Suzuki; Shuji Kimura; Yoshit
π
Article
π
2002
π
Elsevier Science
π
English
β 757 KB
Adhesion of deposit on the combustion chamber walls affects the state of the heat loss into combustion chamber wall surfaces in the internal combustion engine. In this study, as the first step, the instantaneous surface temperature and the instantaneous heat flux were measured by thin film thermocou