𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of the injection- molding parameters on the cellular structure and thermo-mechanical properties of ethylene-propylene block copolymer foams

✍ Scribed by J. F. Gómez-gómez; D. Arencón; M. A. Sánchez-soto; A. B. Martínez

Book ID
115549209
Publisher
John Wiley and Sons
Year
2012
Tongue
English
Weight
647 KB
Volume
32
Category
Article
ISSN
0730-6679

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of Processing Parameters on the M
Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams
✍ Steven Wong; John W. S. Lee; Hani E. Naguib; Chul B. Park 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 356 KB 👁 1 views

## Abstract In this study, the effects of processing parameters on the mechanical properties of injection molded thermoplastic polyolefin (TPO) foams are investigated. Closed cell TPO foams were prepared by injection molding process. The microstructure of these foamed samples was controlled by care

Isotactic polypropylene/ethylene-co-prop
Isotactic polypropylene/ethylene-co-propylene blends: Influence of the copolymer microstructure on rheology, morphology, and properties of injection-molded samples
✍ L. D'orazio; C. Mancarella; E. Martuscelli; G. Sticotti; G. Cecchin 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 401 KB 👁 2 views

Melt rheological behavior, phase morphology, and impact properties of isotactic-polypropylene (iPP)-based blends containing ethylene-propylene copolymer (EPR) synthesized by means of a titanium-based catalyst with very high stereospecific activity (EPR Ti ) were compared to those of iPP/EPR blends c

Influences of copolymerization condition
Influences of copolymerization conditions on the structure and properties of isotactic polypropylene/ethylene–propylene random copolymer in situ blends
✍ Yu-Qing Zhang; Zhi-Qiang Fan; Lin-Xian Feng 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 163 KB 👁 2 views

## Abstract A spherical TiCl~4~/MgCl~2~‐based catalyst was used in the synthesis of __in situ__ isotactic polypropylene/ethylene–propylene random copolymer blends by propylene bulk polymerization and subsequent gas‐phase copolymerization of ethylene with propylene. Different copolymerization condit