𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of the glycol component in dibenzoate plasticizers on the properties of plasticized PVC films

✍ Scribed by Elżbieta Wardzińska; Piotr Penczek


Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
45 KB
Volume
97
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A series of glycol dibenzoates was synthesized by transesterification of glycols with methyl benzoate. PVC films were prepared from suspension grade PVC and the dibenzoates at a constant content of the dibenzoates. The mechanical properties of the films were measured. In addition, the extractability and the absorption of various liquids was determined. The effect of the structure of the glycol component in the dibenzoates on the mechanical properties of the films and the plasticizing efficiency was investigated. Neopentyl glycol dibenzoate exhibits the highest plasticizing effect, followed by triethylene and ethylene glycol dibenzoates and the 2‐(n‐butyl)‐2‐ethyl‐1,3‐propanediol derivative. It was found that the ether linkages in the dibenzoates mainly contribute to the plasticization of PVC. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 822–824, 2005


📜 SIMILAR VOLUMES


Investigation on the effect of the acid
✍ T. S. Gancheva; P. D. Dinev; K. G. Bukovska 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 English ⚖ 404 KB 👁 1 views

The effect of polyester plasticizer of differing acid number on the properties of PVC compositions, to be used for electric insulation purposes, is investigated. It is established that the acid number affects both the temperature dependence of the specific bulk resistance in vitreous and highly elas

Influence of the plasticization on free
✍ J. Borek; W. Osoba 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 158 KB 👁 1 views

Positron lifetime measurements in pure polyvinyl chloride (PVC) and in the plasticized PVC have been performed. Tricresyl phosphate was used as a plasticizer. Samples of the PVC were prepared with eight different plasticizer concentrations (from 0 to 35% of the plasticizer in the PVC). All of the me

The influence of polyols on the molecula
✍ Angela L. M. Smits; Stephan H. D. Hulleman; Jeroen J. G. Van Soest; Herman Feil; 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 122 KB 👁 2 views

The effect of processing temperature and time on the Btype crystallinity of thermoplastic starch was studied by recording X-ray diffractograms of conditioned, compression molded starch systems containing glycerol and water as plasticizers at a ratio of 100 : 30 : 56 (w/w/w). Initial recrystallizatio