𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of the conical section geometry on the hydrodynamics of shallow spouted beds

✍ Scribed by M.J. San José; M. Olazar; R. Aguado; J. Bilbao

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
643 KB
Volume
62
Category
Article
ISSN
0923-0467

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Correlation for calculation of the gas d
Correlation for calculation of the gas dispersion coefficient in conical spouted beds
✍ M.J. San José; M. Olazar; F.J. Peñas; J.M. Arandes; J. Bilbao 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 737 KB

On the basis of the experimental study of air velocity profiles in a pilot plant scale unit, the validity of the hypotheses of the gas flow model proposed for conical spouted beds, that is to say, flow rate conservation along each streamtube and plug flow in the spout zone, has been proven. A correl

Hydrodynamics of slot-rectangular spoute
Hydrodynamics of slot-rectangular spouted beds: Effect of slot configuration on the local flow structure
✍ Z. Chen; C. J. Lim; J. R. Grace 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 295 KB

## Abstract The local flow structure in a slot‐rectangular spouted bed column of 300 mm × 100 mm cross‐section was investigated with slots of equal area but different length‐to‐width ratios. Dead‐zones, spout shapes, and distributions of pressure, particle velocity, and voidage were explored. The l

Minimum spouting velocity for the pyroly
Minimum spouting velocity for the pyrolysis of scrap tyres with sand in conical spouted beds
✍ Martin Olazar; Roberto Aguado; María José San José; Sonia Alvarez; Javier Bilbao 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 155 KB

The effect of temperature (in the 298-973 K range) on minimum spouting velocity has been studied in conical spouted beds made up of mixtures of tyre and sand particles, for different sizes of tyre particles and for different tyre/sand ratios. The good fit to the experimental results confirms the val