𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of temperature on low-density polyethylene films through conduction measurement

✍ Scribed by Boudou, L; Guastavino, J

Book ID
126507685
Publisher
Institute of Physics
Year
2002
Tongue
English
Weight
139 KB
Volume
35
Category
Article
ISSN
0022-3727

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influence of annealing treatment on the
Influence of annealing treatment on the electrical conductivity of low density polyethylene
✍ L Boudou; Dr J Guastavino; N Zouzou; J Martinez Vega πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 English βš– 134 KB

## Abstract The results obtained with films of a low density polyethylene subjected to variations in temperature from ambient to 60 °C and in an applied field from low values of around 1 V ¡m^βˆ’1^ to high values (about 50 V ¡m^βˆ’1^) are presented. To identify the probable conduction mechanism in such

Temperature effects on permeation of mod
Temperature effects on permeation of modified atmosphere gas mixtures through a low density polyethylene package film
✍ Kamil Tokatli; Mustafa Γ–zilgen πŸ“‚ Article πŸ“… 1993 πŸ› John Wiley and Sons 🌐 English βš– 351 KB

## Abstract Permeation of CO~2~ and O~2~ through a low density polyethylene film was studied with CO~2~‐N~2~ mixtures in the temperature range 263‐283 K, and with CO~2~‐O~2~‐N~2~ mixtures in the range 257‐313 K. The temperature dependence of the permeabilities of these gases agreed with the Arrheni

The low temperature response of slit-sea
The low temperature response of slit-seals in low density polyethylene thin films
✍ Michael Simpson; Jeremy Bowman πŸ“‚ Article πŸ“… 1991 πŸ› Society for Plastic Engineers 🌐 English βš– 756 KB

## Abstract The low temperature mechanical strength and the modes of failure of low density polyethylene (LDPE) films and hot air slit‐seals have been assessed. Seven different LDPEs were blown into thin films (∼30ΞΌm) and slit‐sealed on‐line, both the extrusion and sealing being undertaken using co