𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of surface roughness on the corrosion behaviour of magnesium alloy

✍ Scribed by R. Walter; M. Bobby Kannan


Publisher
Elsevier Science
Year
2011
Weight
886 KB
Volume
32
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Influence of surface modification on the
✍ Joy E. Gray-Munro; Christine Seguin; Michael Strong πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 350 KB πŸ‘ 1 views

## Abstract In recent years, magnesium alloys have been proposed as a new class of metallic bioabsorbable implant material. Unfortunately, the production of hydrogen gas and an increase in alkalinity are both by‐products of the degradation process of these materials. This necessitates the developme

Influence of testing parameters on the c
✍ M. KΓΌhlein; U. Galovsky πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 German βš– 346 KB πŸ‘ 1 views

## Abstract In sodium chloride solutions alloy composition, phases, microstructure and grain size influence the corrosion behaviour of magnesium alloys. Concentration and distribution of the critical impurities iron, nickel and copper affect the corrosion performance strongly. Salt spray tests acc

Studies on the influence of chloride ion
✍ Hikmet Altun; Sadri Sen πŸ“‚ Article πŸ“… 2004 πŸ› Elsevier Science βš– 324 KB

Magnesium-based light alloys belong to a class of structural materials with increasing industrial attention. Magnesium alloys show the lowest density among the engineering metallic materials, low cost and large availability. As a consequence, this light alloys have a promising future. The paper pres

The influence of NaCl and CO2 on the atm
✍ R. LindstrΓΆm; L.-G. Johansson; J.-E. Svensson πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 German βš– 411 KB πŸ‘ 1 views

The influence of NaCl and CO 2 on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0 8C and the concentration of CO 2 was < 1 ppm or 350 ppm.