✦ LIBER ✦

Influence of pulse plating conditions on the structure and properties of pure and composite nickel nanocrystalline coatings

✍ Scribed by E. A. Pavlatou; N. Spyrellis

Book ID: 110201785
Publisher: SP MAIK Nauka/Interperiodica
Year: 2008
Tongue: English
Weight: 446 KB
Volume: 44
Category: Article
ISSN: 1023-1935
DOI: 10.1134/s1023193508060165

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of the Composition of Dilute N

Influence of the Composition of Dilute Nickel-Plating Electrolytes on the Physicomechanical Properties of Electroplated Coatings

✍ E. Binkauskene 📂 Article 📅 2005 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 50 KB

Influence of drying conditions on the op

Influence of drying conditions on the optical and structural properties of sol–gel-derived ZnO nanocrystalline films

✍ A PAKDEL; F E GHODSI 📂 Article 📅 2011 🏛 Springer-Verlag 🌐 English ⚖ 480 KB

Effect of pulsed plasma and high-current

Effect of pulsed plasma and high-current electron beam treatments on the structure and properties of nickel-based coatings

✍ O. P. Kul’ment’eva; A. D. Pogrebnyak 📂 Article 📅 2008 🏛 Pleiades Publishing 🌐 English ⚖ 988 KB

Effect of annealing conditions on the me

Effect of annealing conditions on the mechanical properties of pure and molybdenum-coated niobium

✍ V. M. Amonenko; V. M. Azhazha; G. P. Kovtun 📂 Article 📅 1972 🏛 Springer 🌐 English ⚖ 284 KB

Influence of the spinning conditions on

Influence of the spinning conditions on the structure and properties of polyamide 12/carbon nanotube composite fibers

✍ Carine Perrot; Patrick M. Piccione; Cécile Zakri; Patrice Gaillard; Philippe Pou 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 311 KB 👁 2 views

The influence of the electroplating para

The influence of the electroplating parameters on the conditions of deposited nickel-iron coatings

✍ J. E. Hoffmann; K. Bedner; H. Clemens; R. Degen; C. Dhum; F. Giro; U. Kirsch; M. 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 293 KB

## Abstract Several specific electroplating parameters are varied to develop a manufacturing process for nickel‐iron coatings with low residual stresses and favourable structures and hardness values. Here, the produced coating conditions on the surface are characterised according to alloy compositi