✦ LIBER ✦

Influence of polyether chain and synergetic effect of mixed resins with different functionality on adhesion properties of epoxy adhesives

✍ Scribed by Xiaolong Hu; Pengcheng Huang

Publisher: Elsevier Science
Year: 2005
Tongue: English
Weight: 198 KB
Volume: 25
Category: Article
ISSN: 0143-7496
DOI: 10.1016/j.ijadhadh.2004.08.001

No coin nor oath required. For personal study only.

✦ Synopsis

In this paper, the influence of flexible polyether chain in the network of the adhesive and synergetic effect of mixed resins with different functionality on the adhesion properties of epoxy adhesives at À196 1C, room temperature(RT) and 140 1C were studied. The results indicated that the lap shear strength increases at RT and À196 1C and decreases at 140 1C with increasing polyether chain in the network of the epoxy resin with unique functionality. If the adhesive is a mixture of epoxy resins with different functionality, a maximum or minimun lap shear strength at À196 1C will appear at certain resin ratio depending on that whether the polyether chain was introduced into the network.

📜 SIMILAR VOLUMES

Influence of chemical and plasma treatme

Influence of chemical and plasma treatments on the adhesive properties of PTFE with an epoxy resin

✍ J.P. Badey; E. Espuche; Y. Jugnet; B. Chabert; Tran Minh Duct 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 727 KB

One-component epoxy resin with imine as

One-component epoxy resin with imine as water-initiated latent hardener: Improvement of the mechanical and adhesive properties by the addition of methacrylate copolymer

✍ Kentarou Suzuki; Yuko Sugita; Fumio Sanda; Takeshi Endo 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 195 KB 👁 2 views

Preparation and characterization of the

Preparation and characterization of the latexes with different particle sizes by semibatch emulsion polymerization and the influence on properties of waterborne pressure-sensitive adhesives

✍ Xiongwei Qu; Nongyue Wang; Peter A. Lovell 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 180 KB 👁 3 views

## Abstract Increasing environmental concerns and regulations are the major driving forces for the development of waterborne pressure‐sensitive adhesives. This article reported the synthesis of a series of poly[(__n__‐butyl acrylate)‐__co__‐(acrylic acid)] latexes with different particle sizes usin