𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of oxygen on biofilm growth and potential sulfate reduction in gravity sewer biofilm

✍ Scribed by Niels H. Norsker; Per H. Nielsen; Thorkild Hvitved-Jacobsen

Book ID
113304140
Publisher
IWA Publishing
Year
1995
Tongue
English
Weight
688 KB
Volume
31
Category
Article
ISSN
1606-9749

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influence of biofilms growth on corrosio
Influence of biofilms growth on corrosion potential of metals immersed in seawater
✍ W. Wang; X. Li; J. Wang; H. Xu; J. Wu πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 German βš– 241 KB πŸ‘ 1 views

The changes of corrosion potential (E corr ) of metals immersed in seawater were investigated with electrochemical technology and epifluoresence microscopy. In natural seawater, changes of E corr were determined by the surface corrosion state of the metal. E corr of passive metals exposed to natural

Influence of dissolved oxygen concentrat
Influence of dissolved oxygen concentration on nitrite accumulation in a biofilm airlift suspension reactor
✍ J. M. Garrido; W. A. J. van Benthum; M. C. M. van Loosdrecht; J. J. Heijnen πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 181 KB πŸ‘ 2 views

The biofilm airlift suspension (BAS) reactor can treat wastewater at a high volumetric loading rate combined with a low sludge loading. Two BAS reactors were operated, with an ammonium load of 5 kg N/(m 3 d), in order to study the influence of biomass and oxygen concentration on the nitrification pr

Metal-on-metal bearings in total hip art
Metal-on-metal bearings in total hip arthroplasties: Influence of cobalt and chromium ions on bacterial growth and biofilm formation
✍ Anton H. Hosman; Henny C. van der Mei; Sjoerd K. Bulstra; Henk J. Busscher; Dani πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 211 KB πŸ‘ 1 views

## Abstract Metal‐on‐metal (MOM) bearings involving cobalt–chromium (Co–Cr) alloys in total hip arthroplasties are becoming more and more popular due to their low wear. Consequences of corrosion products of Co–Cr alloys are for the most part unclear, and the influence of cobalt and chromium ions on